Williams Sound Pocketalker 2.0 Personal Amplifier amplifies the sounds and voices most important to the user. By positioning the microphone close to the preferred sound, user can reduce distracting background noise. Ideal for everyday listening situations, including one-on-one discussions, television listening or conversing in the car.
Use an alcohol wipe or 3% hydrogen peroxide solution to clean the outside of the Pocketalker case and the earphone/ headphone cord. Wiping cloth should be damp rather than soaking wet (see caution below). Lightly swab the unit down, as pressing hard may release liquid into the unit (see caution).
The Pocketalker can be carefully cleaned with Hospital Cleaner Disinfectant Towels with Bleach, or alcohol however, we cannot guarantee that the coloring/markings on the unit will not be affected as a result of multiple bleach applications.
Replace the earphone foam pads with each new user, or use disposable sanitary headphone covers with each new user. (Earphone/headphone pads/covers are available through Williams Sound).
If using a plug-in microphone (MIC 014-R), replace the optional disposable sanitary microphone cover (WND 012) with each new user. (Both the MIC 014-R Plug-In Microphone and WND 012 Sanitary Microphone Cover are available through Williams Sound. The WND 012 is sold in packs of 100).
Do not spray or put liquid directly on the unit. Apply cleaning solution to a wipe or swab to clean the Pocketalker. Avoid pressing hard. It is crucial that No Liquid of any kind gets in the electronics of the unit, (i.e. Headphone jack, microphone jack, USB charging jack, internal speaker, internal microphone, volume knob, tone control or t-coil switch).
Caution: Avoid getting any liquid inside the Pocketalker unit as it can damage the circuit board and will void the warranty.
Particular
Dimensions
Dimensions
4.9” L x 2.0” W x 1.0” H. (124mm x 51mm x 25mm) (Not including clip or microphone assembly)
Weight
3.1 oz. (88 grams) (with batteries)
Color/material
White ABS/Polycarbonate molded plastic case.
*Battery Type
Two 1.5V (AAA size), Alkaline* or NiMH rechargeable*
(Williams Sound BAT 010-2 Alkaline or BAT 022-2 NiMH recommended)
Battery Life
Up to 105 hours (typical usage) with the BAT 010-2. Low Battery Indicator: Power “On” Green light on front panel flashes.
**NiMH battery Charging
Charging: 16 hours with BAT 022-2. Red LED blinks when charging. End of Charge: Red LED is on solid. At end of charge, maintenance charge is provided. NOTE: Charging requires optional charging kit BAT KT7 or BAT KT8.
